Screen does not clear after batch mode restore

Go there if you encounter an unexpected error when using the softare. For installation problems, use another forum.

Moderator: feffer

Post Reply
frangalista
Posts: 1
Joined: Thu Oct 08, 2009 11:18 pm

Screen does not clear after batch mode restore

Post by frangalista » Thu Oct 08, 2009 11:24 pm

I am using partimage 0.6.4 in batch mode to restore a partition under debian 4. When the program is done, it fails to clear the screen and further leaves the blue background behind. Even if I invoke clear at this point, the background remains and the terminal does not respond to carriage returns properly (it begins to stair step). Is there any remedy for this?

Post Reply