partimage stops at 99% when making backup

Go there if you encounter an unexpected error when using the softare. For installation problems, use another forum.

Moderator: feffer

Post Reply
Posts: 1
Joined: Mon May 03, 2010 3:13 pm
Location: Berlin - Germany

partimage stops at 99% when making backup

Post by lawi » Mon May 03, 2010 3:34 pm

Hi all,

I'm trying to use partimage from the command line of a clonezilla live installation.

The partition to save is FAT32 (on 320GB 2.5")
As command lines I use:
partimage -M -f3 -o -d -b -c -z0 --volume=0 --debug=1 -B gui=no save /dev/sdb1 /home/partimag/testbackup

and alternatively
partimage -M -f3 -o -d -b -c -z0 /dev/sdb1 /home/partimag/testbackup

The HDD to backup is connected through SATA /dev/sda (OS) is also SATA.
425.50 of 425.72 GiB of data are copied when the progressbar stops.
The copyprocess was fast (2.77GiB/min)

Using px -ax shows that partimage spawns 2 additional processes.

There is no error message. Even the Kernel don't show up any errors.
The partimage log in /var/log also don't show errors.

It simply seems that partimage is waiting for something endlessly :? .

Is there any help on that?
Any questions?

Thanks in advance,

Post Reply